To restart the Haywire equipment in your apartment, identify the preferred method for your unit, and follow the appropriate steps listed below:

Instructions

Method A (Access to Breaker)

• Locate your apartment's breaker panel. It is usually found in the laundry room.
   
• Check the labels on the door for a breaker switch labeled "Laundry/Network Cabinet".
   
• Flip the switch off and back on.
   
• Wait 3 minutes for the Haywire equipment to start.

Method B (No Access to Breaker)

• Locate your equipment enclosure. It is a square panel, usually found in the laundry room.
   
• Remove the panel by unscrewing the four screws in each corner.
   
• Unplug the power cord from the outlet at the bottom of the enclosure (see picture).

• After 15 seconds, plug the power cord back in.
   
• Wait 3 minutes for the Haywire equipment to start.