Federal Hill has two different equipment configurations. To restart the Haywire equipment in your apartment, identify the correct configuration for your unit, and follow the appropriate steps listed below:

Instructions

Setup A (Access to Enclosure)

• Locate your equipment enclosure. It is a white cabinet, usually found in a closet (see picture 1).

• Open the cabinet.
   
• Unplug the power cord from the outlet at the bottom of the enclosure (see picture 2).

• After 15 seconds, plug the power cord back in.
   
• Wait 3 minutes for the Haywire equipment to start.

Setup B (No Access to Enclosure)

• Locate your apartment's breaker panel. It is usually found in a bedroom.
   
• Check the labels on the door for a breaker switch labeled "Bedroom" (see picture).

• Flip the switch off and back on.
   
• Wait 3 minutes for the Haywire equipment to start.