To restart the Haywire equipment in your apartment, follow the steps listed below:

Instructions

• Locate your equipment enclosure. It is a square panel, usually found in the closet by your front door.
   
• Remove the panel by unscrewing the four screws in each corner.
   
• Unplug the ethernet cable from the first port of your network switch (see picture). The plastic clip at the end of the cable must be pushed down.

• After 15 seconds, firmly plug the ethernet cable back into the first port. Ensure that the blue indicator light is illuminated.
   
• Wait 3 minutes for the Haywire equipment to start.